6 
Related:
Back to Site Stores ({{popupVm.storeTotalCount}})
Artists ({{popupVm.artistTotalCount}})
Print your designs onto real silk or poly georgette fabric. Lightweight and sheer, these custom printed ge...
Read More
Ships In 1 - 2 days
Delivery: $12.95
Handmade
Fine details and sharp lines look right at home on printed georgette fabric.
Browse our range of georgette fabrics
Light weight, smooth and non-stretch with a matte finish
100% Silk
Expected Shrinkage = Weft: 6% Warp: 9%
Light weight, soft and non-stretch with a matte finish
100% polyester
Care instructions
Dry clean only recommended, can be hand washed in cold water with silk detergent.
Georgette fabric is a fine woven crepe material that is characteristically lightweight. It is a sheer textile, so the majority of garments made from georgette are lined. Georgette doesn't easily crease (poly georgette barely creases at all) and is perfect for bridal wear, as well as dressmaking and home decor such as fine curtains. Georgette gets its name from Madame Georgette de la Plante, who was a French milliner (someone who makes and/or sells women's hats) and dressmaker. Traditionally it is made from silk, however modern materials can also be used to make georgette fabric, which gives it other properties and characteristics. We offer a 100% silk and a poly printed georgette fabric, custom made right here in our studio with your personalized design.
With Silk Georgette fabric you should expect a fabric shrinkage of approximately 6% on the weft, and 10% on the warp.
Once georgette is printed with your beautiful design, it can be sent straight out to you. We call this "As it comes" and you'll have a white border around your fabric. You can, if you prefer, choose to have your fabric either "Cut on the Line" so all the white edges are removed or as it is a fraying material, you may prefer to have it hemmed. You'll be given the option of a black or white thread, and either an overlocked hem, which stitches over the edges of your fabric or a two fold hem with a straight stitch. If you choose to have your custom printed georgette material hemmed, then please allow 0.23" - 0.31" on each of the sides of your fabric (0.47" - 0.63" in total) for hemming when you give us your bespoke measurements.
Note: With Silk Georgette fabric you should expect a fabric shrinkage of approximately 6% on the weft, and 10% on the warp.
All fabrics are printed digitally here in our studio. There are different methods that we use to do this based on whether the material is natural or synthetic. These methods include our classic method of pigment printing and reactive dye sublimation, both of which will print your personalized design in full color to your chosen fabric. Natural materials are pigment printed, which is where the colored dyes are applied directly to the fabric, in a localized way, building the design up. Synthetic materials use our two-step dye sublimation printing. We first print your custom design onto transfer paper, which is then bonded with heat directly to your fabric. Due to the print process, large areas of solid color may show minor blemishes or discoloration. This is to be expected and we would advise avoiding large solid blocks of color if possible.
All of our fabrics are printed at 200dpi. This works for us as it combines a great quality as well as a good file weight. In order to avoid resizing and interpolation, we recommend that you scale your image to 100% at 200dpi. Our design interface works with a traffic light system that acts as a quality marker for your designs. This will show you whether the resolution is too low for printing. When you re-upload your design with a highest resolution, the traffic lights will change color, showing you're good to go. A message will pop up alongside the traffic lights to let you know if the resolution is too low or if you have a good quality image.
Your uploaded design will automatically be scaled to fit the size of fabric you've chosen. You can change the dimensions of your fabric by amending the measurements on the ‘Product Options’ tab, under ‘Print Size’. To see how this fits with the dimensions of your image/design, you can refer to the ‘Images & Text Tools’ tab under 'Quality Information'. Here, you will be able to edit the dimensions of the image.
We always recommend using an RGB color space when you upload your images. More specifically, we suggest using the sRGB image profile, to achieve best color results. This will need to be done in your editing software; choose RGB as the working space, and assign the image profile as sRGB (full name sRGB IEC61966-2.1)
There is no length limit for most of our fabrics. Our preview design window is set up to displaying a maximum of 10m (32.8 ft) to help you visualize the print, but that doesn't mean this is the print limit. If you'd like to order more, you can increase the quantity (x2 for 20m or x4 for 40m for example) and order as much as you'd like. Larger volumes will receive an automatic discount too. While the fabric length is nothing to worry about, each individual fabric will have a maximum width side: These can be found on the fabric's page information or in the design interface.
Yes, that will help you when it comes to cutting or framing your printed fabric. We recommend always adding a little extra space for borders into your purchased fabric size. When we print your materials, or send out fabric samples, we typically trim squarely around the fabric, leaving approximately 5mm white space. Cutting neatly on the line has an additional fee.
Crocking is the term used to describe fading along the creases in a fabric. It typically can occur after constant washing or heavy use of digitally printed natural fabrics. Crocking can be minimized by hand washing your fabrics at a cooler temperature, rather than machine washing. If you want to make sure there's no chance of crocking, we'd suggest you use a poly fabric.
Yes, our organic fabrics don't have an additional coating like non-organic fabrics have, which means it absorbs the inks deep into its fiber and reducing the color strength slightly (this can be approximately -40%). If you would like a bolder, more vibrant color for your fabric, we would suggest using a non-organic fabric.
Unfortunately not; all of our fabrics have been tested meticulously to ensure we know exactly how to get the best results, and our facilities cater perfectly to them. If you are set on a fabric we don't offer, we can offer custom printed sublimation paper to order which will allow you to heat press your designs onto your own fabrics.
If your design is simple and less intricate, a JPEG will be absolutely fine. However, if you have created a design with multi-colored detailing, we would recommend saving your design in a TIFF format.
Similar to other fabric printing processes, shrinkage can occur. The amount of shrinkage will depend on the fabric, but as a general rule of thumb, please allow for 2-8% shrinkage when working out your measurements. Shrinkage is not an exact science, and the amount of shrinkage will vary from print run to print run. We'd always suggest order a little more than you need for your project.
Many of the fabrics we offer are semi-transparent, so printing on both sides of the fabric is not a service we offer.
At the moment, all of our fabric labels are printed on satin fabric. For now, we believe this is the best choice, but will potentially introduce other options in the future. All labels are cut to the same label format. If you would like to choose a different fabric and format for your labels, you could always order a sheet of the fabric of your choice to create labels yourself.
Our fabrics are printed with water-based inks as environmental consciousness is always front of our minds. Water-based inks include no chemicals or solvents, and our printing process uses heat to fix colors and patterns into place to avoid excess or contaminated water returning into the water system (this is something that can occur through steaming). All printing, fulfilment and production is done in our one facility, and rather than rolling the fabrics or sending them in a tube, you will receive your material folded up. This amounts to 150 tubes saved a week, as well as much more space on the delivery van for more orders. (For delicate fabrics we ensure to package appropriately).
Although very rare, there could be a slight color difference from one print run to another. This is a normal part of the printing process, however we are always working to improve our color profiles. It is unlikely that the difference in print runs will be hugely different (for example, it's unlikely your orange is suddenly going to be red). The likelihood of color variations can be intensified fabric to fabric due to materials having different grains and textures; natural fabrics typically have more muted color tones, while poly alternatives have a bolder hue. This is because the construction of the material is different, and the printing method has to be altered slightly for more delicate, natural textiles.
Our full cut & sew service at Bags of Love can be used to your full advantage. We even offer hemming for your fabrics at a small additional cost. Our hems are created with a one or two cold hem that typically uses around 5 to 20mm of fabric (depending on the thickness of your chosen material). Please bare this in mind when you are ordering your printed fabric with hems: If you would like your finished piece to be 40" x 40", change your dimensions to 41" instead to allow space for your hems (you will also need to include additional for potential shrinkage). The thicker the fabric, the bigger the hem will be. Your printed fabric will be hemmed with either Black or White thread. If you are ordering a lightly woven material or a printed silk, you will find that one hem will be straight, while the other slightly rippled. The hemming material allowances are as follows and you need to make your print bigger to accommodate the hem:
For further information about our fabrics see our FAQs.
Please note: As everything we provide is handmade to order, you may find a slight variance in the sizes.
